Hydrolevel OS-100 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Hydrolevel OS-100. Hydrolevel OS-100 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
83 Water Street New Haven, CT 06511 Phone (203) 776-0473 FAX (203) 773-1019 www.hydrolevel.com
MODEL OS-100
Outdoor Sensor Kit
for Model 3200-Plus and
Model 3250-Plus
Fuel Smart HydroStats
manufactured after 0/0/11
WARNING
Electrical shock hazard. To prevent electrical shock, death or
equipment damage, disconnect power supply before
installing or servicing control. Only qualified personnel may install or service this control in
accordance with local codes and ordinances. Read instructions completely before proceeding.
CAUTION
To prevent serious
burns, boiler
should be thoroughly cooled before installing or
servicing control.
Kit Includes
Outdoor Reset Sensor with 9-foot cable
Sensor mounting bracket with 2 screws and 1 wire clip
Two spade connectors
Knockout wire bushing
This document provides instructions for connecting the Hydrolevel Outdoor Sensor Kit to an installed
Fuel Smart HydroStat control. For information on installing the HydroStat control, please refer to the
installation instructions provided with the control or log onto www.hydrolevel.com.
Before installation, determine the
proper location for the sensor
Sensor should be mounted on the
northern outside wall of the house,
shielded from direct sunlight.
Sensor should be installed high
enough off the ground to protect
it from accidental damage or
drifting snow.
Sensor should be installed away
from potential heat sources
such as exhaust fans, windows,
or doors.
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Outdoor Sensor Kit

183 Water Street • New Haven, CT 06511 • Phone (203) 776-0473 • FAX (203) 773-1019 • www.hydrolevel.comMODEL OS-100Outdoor Sensor Kitfor Model 3200-Pl

Page 2 - STEP 1 Using the

2INSTALLING THE SENSORWIRINGSTEP 2 Secure thesensor on the bracket bypressing it down into theslotted hole as shownabove.STEP 3 Using an extended wood

Page 3 - SETTING THE CONTROL

SETTING THE CONTROL3IMPORTANT: The outdoor sensor must be plugged in prior to setting the control.SETTING WARM WEATHER SHUTDOWNThe warm weather shutdo

Page 4 - HOW THE OUTDOOR SENSOR WORKS

483 Water Street • New Haven, CT 06511 • Phone (203) 776-0473 • FAX (203) 773-1019 • www.hydrolevel.comLIMITED MANUFACTURERʼS WARRANTYWe warrant produ

Commentaires sur ces manuels

Pas de commentaire